What is CRC and HRC?

Nov 05, 2026

Leave a message

In the steel manufacturing industry, CRC and HRC refer to two major categories of flat steel products: Cold Rolled Coil (CRC) and Hot Rolled Coil (HRC). Both are widely used in construction, automotive manufacturing, machinery production and metal fabrication. However, they differ in production processes, thickness ranges, surface conditions, mechanical properties and applications.

For buyers searching for Cold Rolled Iron, understanding the difference between CRC and HRC is important when selecting steel materials for manufacturing and industrial projects. Although cold rolled steel is generally produced from hot rolled steel, additional processing gives CRC a smoother surface and closer dimensional control.

This article explains what CRC and HRC mean, compares their technical parameters, examines common steel grades and provides practical purchasing information for international steel buyers.

1. What Is HRC (Hot Rolled Coil)?

HRC stands for Hot Rolled Coil. It is manufactured by heating steel slabs to high temperatures and passing them through a series of rolling stands to reduce their thickness. After rolling, the steel is cooled and coiled for storage, transportation or further processing.

Hot rolling is generally performed above the steel's recrystallization temperature. This allows steel to undergo substantial deformation during the rolling process.

After cooling, a layer of iron oxide known as mill scale normally forms on the surface. Standard hot rolled steel therefore has a darker and rougher surface than Cold Rolled Iron.

HRC is commonly supplied in thicker gauges and is widely used in structural fabrication, steel pipes, machinery components, construction materials and general engineering.

For example, ArcelorMittal Dofasco publishes a hot rolled product thickness range of 1.50–12.70 mm and a maximum width of 1,600 mm for its relevant product range.

Hot rolled steel is suitable for applications where material thickness, structural performance and production cost are more important than a smooth surface finish.

2. What Is CRC (Cold Rolled Coil)?

CRC stands for Cold Rolled Coil. It is generally manufactured from hot rolled steel that has undergone pickling and cold rolling.

During pickling, acid treatment removes the oxide scale formed during hot rolling. The steel then passes through cold rolling mills, where rollers reduce its thickness and improve dimensional accuracy.

Cold rolling takes place below the steel's recrystallization temperature. This process increases strength through work hardening. Depending on the required mechanical properties, the material may undergo annealing and temper rolling after cold reduction.

Cold Rolled Iron is widely used in applications requiring a smooth surface, consistent thickness and controlled forming performance.

Typical applications include:

Automotive body components

Electrical appliance housings

Metal furniture and office equipment

Steel cabinets and enclosures

Sheet metal stamping

Precision metal fabrication

General industrial components

For example, ArcelorMittal Dofasco publishes a cold rolled product thickness capability of 0.33–3.40 mm and a maximum width of 1,570 mm for its relevant product range.

These dimensions represent a specific manufacturer's production capability rather than a universal limit for all steel mills.

3. CRC vs HRC: Direct Technical Comparison

The following table compares cold rolled and hot rolled steel using published product dimensions and representative mechanical property data.

Technical Parameter CRC – Cold Rolled Steel HRC – Hot Rolled Steel
Full Name Cold Rolled Coil Hot Rolled Coil
Production Process Pickling + Cold Rolling Heating + Hot Rolling
Representative Grade DC01 S235JR
Applicable Standard EN 10130 EN 10025-2
Material Number 1.0330 1.0038
Reference Thickness Range 0.33–3.40 mm 1.50–12.70 mm
Reference Maximum Width 1,570 mm 1,600 mm
Tensile Strength 270–410 MPa 360–510 MPa
Yield Strength 140–280 MPa Minimum 235 MPa
Minimum Elongation 28% 24%
Surface Condition Smooth cold rolled surface Hot rolled surface with mill scale
Typical Applications Appliances, furniture, cabinets and stamping Structures, machinery, pipes and fabrication

Important technical conditions:

DC01 mechanical properties shown above apply to the cited manufacturer's specified thickness range.

S235JR minimum yield strength of 235 MPa applies to thickness up to 16 mm.

S235JR elongation requirements depend on thickness and test-piece dimensions.

CRC and HRC figures above refer to different steel grades and are not direct equivalents.

Manufacturing Dimension Comparison

The following dimensions are published production capabilities from ArcelorMittal Dofasco.

Product Minimum Thickness Maximum Thickness Maximum Width
Cold Rolled Steel 0.33 mm 3.40 mm 1,570 mm
Hot Rolled Steel 1.50 mm 12.70 mm 1,600 mm

The data illustrates the different production ranges of the two product categories. Individual mills may offer different dimensions depending on equipment capacity, steel grade and production conditions.

4. Mechanical Properties of Different Cold Rolled Steel Grades

Not all Cold Rolled Iron products have identical mechanical properties. Under EN 10130, different grades are designed for different cold forming requirements.

The following table presents representative published values for commonly used cold rolled steel grades.

Steel Grade Standard Yield Strength (MPa) Tensile Strength (MPa) Minimum Elongation A80 (%)
DC01 EN 10130 140–280 270–410 28
DC03 EN 10130 140–240 270–370 34
DC04 EN 10130 140–210 270–350 38
DC05 EN 10130 140–180 270–330 40
DC06 EN 10130 120–170 270–330 41
DC07 EN 10130 100–150 250–310 44

These reference values apply to specified thickness conditions in the cited technical data. They should not be treated as guaranteed properties for every supplier or every thickness.

DC01 is commonly selected for general cold forming. DC03 and DC04 are suitable for more demanding forming operations. DC05, DC06 and DC07 are designed for applications requiring progressively higher forming performance.

For example, a manufacturer producing metal cabinets may use DC01 for general panel fabrication, while a component requiring deeper drawing may need DC04 or another suitable forming grade.

The correct Cold Rolled Iron grade should therefore be selected according to the final component design, stamping depth and required mechanical properties.

5. What Is the Difference Between CRC and HRC Surface Quality?

Surface condition is one of the most visible differences between cold rolled and hot rolled steel.

Hot rolled steel normally develops mill scale during cooling. This oxide layer gives the material a dark grey or black appearance. If a cleaner surface is required, the material can undergo pickling to remove the scale.

Cold Rolled Iron is processed after the hot rolled surface has been cleaned. Cold rolling produces a smoother and more uniform finish.

Cold rolled steel is therefore frequently selected for products that require painting, coating, stamping or an attractive visible surface.

Surface Characteristic Cold Rolled Steel Hot Rolled Steel
Surface Appearance Smooth and uniform Rougher, usually with mill scale
Surface Oxide Removed during pickling Normally present unless pickled
Thickness Control Closer dimensional control Generally wider dimensional tolerances
Typical Use Visible panels and precision sheet metal Structural and general fabrication

The surface requirements should be specified before purchasing because different surface finishes may affect downstream processing and final product appearance.

6. Why Is Cold Rolled Iron Usually More Expensive Than HRC?

Cold Rolled Iron generally has a higher processing cost than standard hot rolled steel because it requires additional manufacturing stages.

The production route normally includes:

Hot rolling of the original steel material.

Pickling to remove surface oxide.

Cold rolling to reduce thickness.

Annealing to obtain the required mechanical properties, where applicable.

Temper rolling and final finishing, where required.

Each additional production stage requires equipment, energy, processing time and quality control.

However, the price difference between CRC and HRC is not fixed. It depends on steel grade, thickness, width, order quantity, raw material prices, production capacity and market conditions.

Choosing HRC simply because it has a lower purchase price may increase total manufacturing costs if additional surface treatment or dimensional correction is necessary.

Similarly, purchasing Cold Rolled Iron for an application that only requires standard structural steel may result in unnecessary material expenses.

The correct purchasing decision should consider the complete manufacturing process rather than the price per ton alone.

7. CRC and HRC: Which Steel Product Should You Choose?

The choice between CRC and HRC depends on the final application and technical requirements.

Choose Cold Rolled Iron when:

A smooth and uniform surface is required.

The product requires thin steel sheets.

Close thickness control is important.

The material will undergo stamping or cold forming.

The final product includes visible metal panels or housings.

The manufacturing process requires a specified cold forming grade.

Choose Hot Rolled Coil when:

The application requires thicker steel.

The material is used for structural fabrication.

A standard hot rolled surface is acceptable.

The product is used for steel pipes or machinery components.

Material cost is a major consideration.

Additional surface finishing is not required.

For deep drawing and complex stamping, buyers should pay attention to elongation, yield strength and tensile strength rather than choosing material based only on surface appearance.

8. What Should Buyers Check Before Purchasing Cold Rolled Iron?

Before placing an order for Cold Rolled Iron coils or sheets, buyers should confirm the following technical and commercial requirements.

Item Required Information
Product Cold Rolled Iron
Product Form Coil or Sheet
Steel Grade DC01, DC03, DC04, SPCC or other specified grade
Applicable Standard EN 10130, JIS G 3141 or another agreed standard
Thickness Required thickness in mm
Width Required width in mm
Sheet Length Required length in mm
Surface Finish Required surface finish
Yield Strength Specified value in MPa, if required
Tensile Strength Specified value in MPa, if required
Elongation Specified percentage, if required
Quantity Required quantity in metric tons
Coil Weight Confirmed before order placement
Sheet Bundle Weight Confirmed before order placement
Weight Settlement Actual Weight
Packing Export packing according to product form
Destination Country and destination port

Buyers should also request the relevant Mill Test Certificate (MTC) and check that the material grade, dimensions and mechanical properties comply with the purchase order.

9. Cold Rolled Iron Supply from China – Raysteel Resource

China is an important source of cold rolled flat steel products for international steel buyers. When purchasing Cold Rolled Iron from Chinese steel mills, buyers should pay attention to material specifications, product availability, quality documents, packing and shipment arrangements.

Raysteel Resource supplies Cold Rolled Iron coils and sheets sourced from Chinese steel mills.

Our supply arrangements include:

Product Forms: Cold rolled steel coils and sheets.

Material Source: Chinese steel mills.

Export Market: African countries and other international destinations.

Weight Settlement: Actual Weight.

Coil Weight: Confirmed before order placement.

Sheet Bundle Weight: Confirmed before order placement.

Packing: Arranged according to product form and shipping requirements.

Shipping Marks: According to buyer's instructions.

For weight settlement, the final invoiced quantity is calculated according to the actual net weight of the delivered goods, as agreed in the purchase contract.

For coil and sheet orders, individual coil weight and sheet bundle weight are confirmed before order placement. This allows buyers to arrange transportation, unloading and warehouse handling according to the shipment requirements.

Raysteel Resource focuses on clear specification confirmation, Chinese mill sourcing and export shipment coordination to support overseas steel buyers.

Whether you require Cold Rolled Iron for appliance manufacturing, furniture production, metal stamping or general industrial fabrication, our team can review your requirements and check suitable supply resources.

Contact Raysteel Resource today to request a quotation for Cold Rolled Iron coils and sheets from China.

Cold Rolled Steel Sheet Close Up
 
Cold Rolled Metal Coil Warehouse

 

Cold Rolled Steel Sheet Metal Stamping

 

Send Inquiry