Structural Steel & Fabricated Components for Construction Machinery- High-Strength Steel Profiles, Wear-Resistant Plates & Heavy Weldments

 

Manufacturing high-yield structural steel profiles, wear-resistant steel plates, and precision weldments for excavators, cranes, loaders, and mining equipment. From S690QL and NM400/NM500 steel plates to custom-machined boom sections and chassis components, our products meet EN 10025-6, ASTM A514, and ISO 9001 standards, providing structural stability and fatigue resistance under heavy cyclic loads.

 

 
First 12 Last
 
Product Categories

 

High-Yield & High-Strength Steel Plates
• Quenched & Tempered Structural Steel: S690QL, S890QL, and Q690D steel plates engineered for mobile crane booms, concrete pump arms, and high-load structural frames.

• Heavy-Duty Structural Profiles: Thick-walled C/U channels, welded H-beams, and hollow sections for chassis frames and crawler undercarriages.

 

Wear-Resistant Steel Solutions
• Abrasion-Resistant Plates (NM400 / NM500 / Hardox Equivalent): High-hardness steel plates (370 to 540 HBW) for excavator buckets, crusher hoppers, and mining truck bed liners.

• Custom Cutting & Curved Liner Plates: CNC flame and plasma cut wear parts pre-drilled and formed for direct field bolt-on or weld-in replacement.

 

Heavy Fabricated Weldments & Components
• Excavator Boom & Arm Assemblies: Precision-welded structural box sections with ultrasonic-tested full-penetration joints.

• Machined Structural Mounts & Bushings: Heavy steel forgings and thick-plate brackets pre-machined with tight pin-bore tolerances (+/- 0.02 mm).

 

Technical Specifications

 

Parameter

High-Yield Structural Steel

Wear-Resistant Steel

Fabricated Heavy Weldments

Material Grade

Q550D, Q690D, S690QL, S890QL, ASTM A514

NM400, NM450, NM500, AR400, AR500

Q355B, Q690D, S355JR, S690QL

Yield Strength

550 MPa to 890 MPa

>= 1000 MPa (Typical)

According to base steel selection

Tensile Strength

650 MPa to 1100 MPa

>= 1250 MPa

According to base steel selection

Hardness Level

200 to 280 HBW

370 to 540 HBW

N/A (Tested per plate base)

Low-Temp Impact Energy

>= 30 J at -40 deg C (Charpy V-Notch)

>= 20 J at -20 deg C

Tested on weld seams per AWS D1.1

Plate Thickness Range

6 mm to 120 mm

4 mm to 80 mm

Structural plate thickness up to 150 mm

Machining Tolerance

Cutting tolerance: +/- 1.0 mm

Hole positioning: +/- 0.5 mm

Pin bore diameter: +/- 0.02 mm

Material Standards

EN 10025-6, GB/T 19879, ASTM A514

GB/T 24186, EN ISO 148-1

AWS D1.1, EN 1090-2 (EXC Class 3)

 

Hot Rolled Steel Plate Suppliers

 

Material Grade Options

High-Yield Quenched & Tempered Steel (S690QL / Q690D)
• Yield Point: Minimum 690 MPa.
• Key Feature: Low carbon equivalent (CEV <= 0.47%) ensures weldability without cold cracking risk while reducing total structural weight by up to 30% compared to standard S355 steel.

 

Abrasion-Resistant Steel (NM400 / NM500)
• Hardness: Nominal 400 HBW to 500 HBW across full plate thickness.
• Key Feature: Through-hardened structure resists sliding contact abrasion from quartz, granite, and ore, extending component service life in excavation and material handling.

 

Weldable Fine-Grain Structural Steel (S355J2+N / Q355D)
• Normalized Condition: Consistent grain structure offering predictable cold forming behavior.
• Key Feature: Ideal balance of toughness and bendability for heavy-duty vehicle chassis and subframes.

 

Manufacturing & Processing Capabilities

Large-Scale CNC Cutting:

Gantry fiber laser (up to 20 kW) and underwater CNC plasma cutting tables handling plates up to 4.0 meters wide and 18 meters long.

Heavy-Duty CNC Press Braking:

1600-Ton press brake capable of cold-forming high-strength steel up to 25 mm thickness in single-pass lengths up to 12 meters.

Robot & Submerged Arc Welding:

Automated robotic MIG welding stations and heavy submerged arc welding (SAW) units for deep-penetration structural seams.

Post-Weld Machining & Boring:

Floor-type CNC horizontal boring mills achieving bore concentricity within 0.03 mm on large structural fabrications.

 

Quality Control & Compliance

Ultrasonic Flaw Detection (UT):

100% internal soundless inspection on plate body (ISO 10160 Class S1/E1) and critical weld seams (EN ISO 17640).

Mill Test Certificates (MTC):

Issued per EN 10204 3.1 with every batch, confirming chemical heat analysis, yield strength, tensile tests, and Charpy impact values.

Non-Destructive Testing (NDT):

Magnetic Particle Inspection (MPI) and Dye Penetrant Inspection (DPI) applied to high-stress weld toes and cut edges.

Dimensional & Surface Verification:

Laser tracker dimensional inspection and electronic surface roughness profiling on pre-machined pin joints.

 

 
 
Application Matrix

Excavators & Wheel Loaders:

High-strength boom arms, heavy bucket side-cutters, wear liners, and quick-hitch brackets.

Mobile & Tower Cranes:

Telescopic jib box sections, outrigger beams, and heavy turntable adapter plates.

Mining & Quarry Equipment:

Dump truck bed liners, jaw crusher feed chutes, and conveyor transfer hoppers.

Road & Concrete Machinery:

Concrete pump truck boom sections, paver screed plates, and soil stabilizer mixing drums.

 

 

Order Quantities & Lead Times

Minimum Order Quantity (MOQ):
• Standard High-Strength Steel Plates: 5 Metric Tons per thickness/grade.
• Custom Cut-to-Size Wear Plates: 10 Pieces.
• OEM Fabricated Weldments / Boom Sections: 2 Units or 3 Metric Tons.

 

Production Lead Times:
• Standard Cut & Drilled Plates: 10 to 15 days after drawing confirmation.
• Heavy Fabricated Weldments: 25 to 35 days including NDT and trial assembly.
• Monthly Production Capacity: 8500 Metric Tons of heavy structural steel and processed components.

13CrMo4-5 Heat Resistant Steel Plate – European Standard Low Alloy

 

Packaging & Export Logistics

 

 

Heavy-Duty Export Packaging:

Steel plates and weldments secured on reinforced heavy-timber runners or steel pallets with heavy steel banding.

 

Rust Prevention Coating:

Exposed machined surfaces and weld bevels coated with removable anti-rust oil or wax film prior to wrapping.

 

Container & Break-Bulk Shipping:

Optimized flat-rack (FR), open-top (OT), or standard container loading according to piece dimensions and crane lifting limits at destination ports.

 

 

 

FAQ

 

 

Q: What steel grades do you recommend for reducing the dead weight of crane booms or pump arms?

A: We recommend quenched and tempered steels such as S690QL or Q690D. These grades provide a yield strength of 690 MPa--nearly double that of standard S355 steel--allowing engineers to reduce plate thickness by 25% to 35% without compromising structural payload or safety factors.

Q: How do you control distortion when cutting and welding thick high-strength steel plates?

A: We utilize symmetrical cutting paths, submerged plasma cutting to control heat input, and rigid hydraulic clamping fixtures during welding. Pre-heating and interpass temperature controls (100 deg C to 180 deg C) are strictly maintained per WPS specifications to prevent thermal distortion and hydrogen-induced cracking.

Q: What quality documents are supplied with exported heavy machinery components?

A: Every shipment includes EN 10204 3.1 Mill Test Certificates for raw steel, UT/MPI Non-Destructive Testing reports, dimensional inspection records, welding procedure qualification records (WPQR), and coating thickness reports.

Q: Can you pre-machine pin holes on large boom structures before shipping?

A: Yes. We perform final pin-bore machining on floor-type CNC horizontal boring mills after all structural welding and stress-relieving steps are completed. This guarantees pin bore alignment, roundness, and center-distance tolerances within +/- 0.02 mm across multi-meter spans.

Q: What measures prevent brittle fracture of steel parts operating in sub-zero winter conditions?

A: We supply steel grades tested for low-temperature Charpy V-notch impact energy at -20 deg C or -40 deg C (such as S690QL or Q550D). In addition, fine-grain aluminum-killed steel processing ensures high impact toughness, preventing brittle cracking in arctic or cold-climate mining sites.

Q: What drawing formats do you accept for custom OEM component quotes?

A: Our engineering team accepts standard CAD file formats including DWG, DXF, STEP, IGES, and PDF. We perform DFM (Design for Manufacturability) checks on plate nesting, bend radii, and weld joint accessibility prior to issuing formal quotations.

 

modular-1
Request a Quote

Project Information Required for Estimating
To obtain an accurate quotation and manufacturing schedule, please provide:

Steel Grade & Standard: Required steel designation (e.g., S690QL, NM400, Q355B) and material specification standard.

Component Drawings: CAD files (.dxf, .step, or .pdf) indicating dimensions, tolerances, weld symbols, and machined surfaces.

Quantity & Delivery Schedule: Initial sample requirement, batch quantity, and target delivery timeframe.

Special Quality Requirements: Specific NDT inspection levels (e.g., UT Class, MPI 100%), impact testing temperature, or third-party inspection needs (SGS, BV, TUV).

Contact Heavy Machinery Engineering Team
Email: info@tjrsr.com | Phone / WhatsApp: +86 159 0023 5505
Technical inquiry response time: Within 24 business hours with preliminary engineering review.

Send Inquiry