Steel Angle

Send Inquiry
Steel Angle
Details
Hot-rolled structural steel angles (equal and unequal leg configurations) serve as primary load-bearing profiles in construction, tower fabrication, and equipment frameworks.
Category
Structural Steel
Share to
Description

Hot-rolled structural steel angles (equal and unequal leg configurations) serve as primary load-bearing profiles in construction, tower fabrication, and equipment frameworks. Manufactured via continuous hot-rolling mills using prime billets, these L-shaped sections deliver high moment of inertia and bending stiffness relative to weight.


Production strictly conforms to ASTM, EN, and JIS standards, offering uniform cross-sections, controlled corner radii, and low residual stress for structural integrity under dynamic loading.

 

Key Product Characteristics

 

High Strength-to-Weight Ratio: L-shaped geometry offers high structural stiffness, minimizing frame mass under axial and flexural loading.


Controlled Radii & Flange Uniformity: Rolled with precise inner root radii (R) and leg thickness tolerances to prevent stress concentration during fabrication.


Weldability & Formability: Carbon content maintained below 0.23% (CEV <= 0.41%) across standard structural grades, allowing direct field welding without preheating under standard ambient conditions.


Dimensional Stability: Controlled cooling post-rolling minimizes longitudinal bowing, camber, and twisting, ensuring smooth alignment in automated CNC punching/drilling lines.

 

Technical Specifications

 

Parameter

Equal Angle Range

Unequal Angle Range

Tolerance Standard

Leg Size (A x B)

20 x 20 mm to 200 x 200 mm (3/4" x 3/4" to 8" x 8")

30 x 20 mm to 200 x 125 mm

ASTM A6 / EN 10056-2

Thickness (t)

3.0 mm to 24.0 mm (1/8" to 1")

3.0 mm to 18.0 mm

+/- 0.3 mm to +/- 1.0 mm (by thickness)

Standard Lengths

6.0 m, 9.0 m, 12.0 m (20 ft, 30 ft, 40 ft)

Custom fixed lengths up to 15.0 m (+/- 50 mm)

 

Out-of-Square (θ)

90° +/- 45'

90° +/- 45'

Max 1.5% of leg length

Straightness

Camber/Bow <= 1.5 mm/m

Camber/Bow <= 1.5 mm/m

EN 10056-2 Class A / ASTM A6

 

Grades & Standards

 

Standard

Steel Grade

Yield Strength ReH (MPa)

Tensile Strength Rm (MPa)

Key Characteristics & Equivalents

ASTM A36

Structural Carbon

>= 250 (36 ksi)

400 - 550

General framing, riveted/bolted or welded structures. Equivalent to SS400 / Q235B.

EN 10025-2

S235JR / S275JR

>= 235 / >= 275

360 - 510

Impact tested at +20°C (27J). Primary grade for European civil engineering.

EN 10025-2

S355J2 / S355K2

>= 355

470 - 630

High-strength structural grade. Charpy V-notch impact tested at -20°C (27J/40J).

ASTM A572

Grade 50 / Gr 60

>= 345 (50 ksi)

>= 450

High-strength low-alloy (HSLA) columbium-vanadium steel. Reduces dead weight in transmission towers.

JIS G3101

SS400 / SS490

>= 245 / >= 285

400 - 510

Japanese standard commercial structural steel for general machinery and building frames.

 

Surface & Processing Options

 

Surface Finishes

  • Black Hot-Rolled (As-Rolled): Mill scale intact. Suitable for standard indoor framing or secondary shop fabrication.
  • Pickled & Oiled (P&O): Acid-etched to remove mill scale, coated with rust-inhibitive oil. Ideal for laser cutting, precision bending, and immediate powder coating.
  • Hot-Dip Galvanized (HDG): Coated according to ASTM A123 / ISO 1461. Zinc coating thickness 610 g/m² (approx. 85 μm) for 20+ years of outdoor corrosion protection.


In-House Value-Added Processing

  • Precision Saw Cutting: Length tolerance within +/- 2.0 mm; deburred ends ready for assembly.
  • CNC Hole Punching & Drilling: Slotting, round punching, and multi-axis drilling for tower leg connections and gusset plate mounting.
  • Mitre Cutting: Angle cuts from 45° to 90° for welded frame joints.
  • Shot Blasting: Blast cleaned to SA 2.5 standard prior to primer application.

 

Applications

 

Transmission & Telecom Towers: Equal angles (S355J2 / A572 Gr 50) used as main legs and diagonal bracing for lattice tower structures.


Structural Steel Framing: Trusses, purlins, lintels, and building columns in commercial and industrial pre-engineered steel buildings (PEB).


Equipment Frames & Racks: Machine bases, heavy-duty shelving, conveyor supports, and agricultural machinery chassis.


Shipbuilding & Transportation: Stiffeners for ship hulls, container subframes, and railcar underframes (typically using certified grade S275JR/S355J2 with marine classification certificates).

 

Quality Control & Inspection

 

Every production heat undergoes non-destructive and mechanical testing to guarantee compliance with specified international codes:


Chemical Analysis: Spectrometric analysis verifying C, Mn, Si, P, S, and Carbon Equivalent Value (CEV).


Mechanical Testing: Tensile, yield, elongation, and Charpy V-notch impact testing down to -20°C.


Dimensional Verification: Laser gauge measurement for leg width, thickness, out-of-squareness, and straightness.


Surface Defect Inspection: Visual and ultrasonic testing (UT) to detect internal laminations or seam defects.


Documentation Provided: Mill Test Certificate (MTC) conforming to EN 10204 3.1 issued with every shipment, detailing heat number, chemical composition, and physical properties. Third-party inspection (SGS, BV, TUV) supported upon request.

 

Supply & Customization Options

 

Minimum Order Quantity (MOQ)

  • Standard sizes (In-stock billets): 5 Metric Tons per size.
  • Custom mill runs / Special tolerances: 20 - 25 Metric Tons.

Packaging

  • Hexagonal bundles tied with minimum 4 steel straps.
  • Weight per bundle: 1.0 - 3.0 Metric Tons (customized to buyer port unloading capacity).
  • End protectors, plastic wrapping, and anti-rust sea freight protection applied for breakbulk/container shipping.

Marking

Stenciled or die-stamped heat number, grade, size, and standard at 1.5 m intervals along each length.

 

What Buyers Should Provide for a Quote

 

To receive a binding commercial offer within 24 hours, provide the following parameters:

01/

Dimensions: Leg lengths (A x B in mm or inches) and thickness (t in mm or inches).

02/

Material Grade & Standard: E.g., ASTM A36, EN 10025-2 S355J2, JIS SS400.

03/

Surface Condition: Black hot-rolled, HDG (specify zinc weight/micron requirements), or shop primed.

04/

Processing Requirements: Length per piece (e.g., 6.0 m or 12.0 m), mitre cuts, or hole punching drawings.

05/

Quantity: Total tonnage or total linear meters.

06/

Destination & Delivery Terms: Incoterms 2020 (FOB, CFR, CIF) including destination port name and required shipping timeline.

FAQ

 

Q: What is the difference between EN 10025 S235JR and S355J2 angles?

A: S355J2 offers a significantly higher yield strength (>= 355 MPa vs >= 235 MPa for S235JR), allowing structural engineers to reduce overall steel weight by up to 20–25%. Additionally, "J2" guarantees impact toughness down to -20°C (27 Joules minimum), whereas "JR" is tested at +20°C.

Q: Do you supply structural steel angles with Mill Test Certificates according to EN 10204 3.1?

A: Yes. All shipments include an EN 10204 3.1 MTC directly tied to the heat numbers stamped on the steel angles. Traceability is fully maintained from steel billet heat to final delivery.

Q: Can you handle custom hole patterns for tower fabrication orders?

A: Yes. We operate multi-spindle CNC drilling and punching lines capable of executing client-supplied CAD/Tekla drawings with hole placement tolerances within +/- 0.5 mm.

Q: How do you prevent rust during ocean transit for black steel angles?

A: Bundles shipped via breakbulk or sea container undergo surface oiling or anti-rust varnish coating upon request. Desiccant packs and seaworthy waterproof plastic wrapping are applied for long-distance maritime routes.

Hot Tags: steel angle, China steel angle manufacturers, suppliers, factory

Send Inquiry