Spring Steel Strip

Send Inquiry
Spring Steel Strip
Details
Precision-rolled spring steel strip engineered for applications demanding high yield strength, fatigue resistance, and controlled elastic recovery.
Category
Steel Coil & Strip
Share to
Description

Precision-rolled spring steel strip engineered for applications demanding high yield strength, fatigue resistance, and controlled elastic recovery. Supplied in cold-rolled annealed, hardened, and tempered conditions, these strips maintain strict dimensional tolerances and flat cross-sections suitable for high-speed stamping, fine blanking, roll forming, and spring coiling.

 

Key Product Characteristics

 

High Yield Ratio (Rp0.2 / Rm): Exceeds 0.85 in hardened/tempered condition, preventing permanent set under cyclic loading.


Tight Gauge Uniformity: Thickness tolerances down to +/-0.005 mm minimize punch wear and maintain consistent spring rate (k).


Controlled Surface Decarburization: Maximum total decarburization depth bounded under 1.0% of nominal thickness per side to eliminate premature fatigue initiation.


Low Non-Metallic Inclusion Rating: Vacuum-degassed melting practices yield clean steel matrix (ASTM E45 Class A/B thin/heavy < 1.0), ensuring elevated bendability and impact toughness.

 

Technical Specifications

 

Parameter

Specification Range

Thickness

0.05 mm - 6.00 mm

Width

3.00 mm - 650.00 mm

Thickness Tolerance

Standard: ISO 9445 Class Normal / Precision: +/-0.005 mm to +/-0.02 mm

Width Tolerance

Slit Edge: +/-0.10 mm to +/-0.30 mm / Deburred: +/-0.05 mm

Delivery Hardness

Annealed: <= 210 HV / Hardened & Tempered: 350 - 600 HV (36 - 56 HRC)

Tensile Strength (Rm)

Annealed: 500 - 700 MPa / Hardened & Tempered: 1100 - 2000 MPa

Edge Profiles

Mill Edge, Slit (Sheared), Deburred, Rounded (100% radius), Square Cut

Coil ID / OD

ID: 300 mm, 400 mm, 508 mm / OD: Up to 1400 mm (Oscillated winding available)

 

Grades & Standards

 

Standard

High Carbon Grades

Alloy Grades

Corrosion Resistant Grades

EN 10132-4 / EN 10151

C55S, C60S, C67S, C75S, C100S

51CrV4 (1.8159), 80CrV2 (1.2235), 56Si7

X10CrNi18-8 (1.4310)

ASTM / AISI

1055, 1065, 1075, 1095

6150, 5160, 9260

AISI 301, AISI 304

JIS G4802 / G4313

S55C-CSP, S65C-CSP, SK85-CSP

SUP6, SUP9, SUP10

SUS301-CSP, SUS304-CSP

 

Surface & Processing Options

 

Surface Finishes

  • Bright Polished (P): Smooth ground and polished surface (Ra <= 0.3 um) for high fatigue life and low friction.
  • Blue Tempered (P+AF): Thermally oxidized uniform blue oxide film providing mild indoor storage corrosion layer.
  • Yellow/Gold Tempered: Thermally treated target oxidation for decorative or identification requirements.
  • Scaleless Black / Grey (GR): Heat-treated finish without loose oxide scale; suitable for non-critical cosmetic applications.


Temper Conditions

  • Cold Rolled + Soft Annealed (+A / G): Spheroidized microstructure (>= 85% spheroidization) optimized for severe cold forming, fine-blanking, and deep drawing prior to secondary heat treatment.
  • Hardened & Tempered (+QT / H+A): Quenched and tempered continuous strip ready for blanking, coiling, or forming without subsequent heat treatment.

 

Applications

Automotive

Clutch diaphragm springs, seat belt retractor springs, valve shim stock, brake pad retaining clips, sensor diaphragms.

Industrial & Electrical

Belleville washers, wave disc springs, cable ties, power tool recoil springs, switch contacts.

Tools & Hardware

Band saw blades, doctor blades, putty knives, feeler gauges, snap rings, circlips.

 

Quality Control & Inspection

 

Every production lot undergoes rigorous laboratory verification backed by full traceability from heat number to master coil slitting:


Chemical Analysis: Optical Emission Spectroscopy (OES) verifying heat chemistry limits.


Mechanical Testing: Tensile strength (Rm), yield strength (Rp0.2), elongation (A80), micro-hardness testing (Vickers/Rockwell).


Dimensional Verification: Continuous laser thickness gauge logging along coil length; micro-caliper edge checks.


Microstructure & Surface Inspection: Metallographic verification of grain size, spheroidization rate, decarburization layer, and Eddy Current surface defect detection.


Certification: EN 10204 3.1 Material Test Certificate supplied with each shipment.

 

Supply & Customization Options

 

Pancake Coils: Standard single-roll coils wrapped with anti-rust paper and plastic film on wooden skids.


Oscillated / Traverse Wound Coils: Continuous spooling up to 1000 kg per spool, reducing machine downtime during long-run stamping operations.


Cut-to-Length Strips: Flat rectangular sheet strips bundled with steel strapping and edge protectors.


Packaging Protection: VCI (Vapor Corrosion Inhibitor) paper wrapping, sea-freight wooden crates, or heat-treated ISPM-15 compliant pallets.

 

What Buyers Should Provide for a Quote

 

To receive a complete technical quotation within 24 hours, include the following parameters in your inquiry:

01/

Steel Grade & Standard: (E.g., C75S per EN 10132-4 or AISI 1075)

02/

Dimensions: Thickness (mm) x Width (mm) x Tolerances (if tighter than standard)

03/

Delivery Condition: Soft Annealed (+A) or Hardened & Tempered (+QT)

04/

Target Hardness / Tensile Strength: (E.g., 42 - 47 HRC or 1300 - 1500 MPa)

05/

Surface Finish & Edge Condition: (E.g., Bright Polished, Slit Edge vs. Rounded Edge)

06/

Coil Configuration & Quantity: Coil weight limits, ID/OD constraints, or cut length; Total tonnage required.

FAQ

 

Q: What is the difference between soft annealed (+A) and hardened/tempered (+QT) spring steel strips?

A: Soft annealed strip has a spheroidized carbide microstructure with low hardness (<= 210 HV), enabling bending, stamping, and complex forming without tool damage. Parts formed from soft annealed steel must be batch-hardened and tempered afterward. Hardened and tempered strip is continuously heat-treated at the mill to target mechanical properties (35 - 56 HRC), eliminating downstream heat treatment but limiting forming operations to shallow bends or punching.

Q: How do alloy grades like 51CrV4 differ from high-carbon grades like C75S?

A: High-carbon grades (C67S, C75S, C100S) rely primarily on carbon content for hardness and yield strength, making them cost-effective for static or moderate cyclic loading. Alloy grades like 51CrV4 (6150) incorporate Chromium and Vanadium, which refine grain size, increase hardenability, and significantly elevate fatigue strength and elevated-temperature relaxation resistance (up to 300 degrees C).

Q: What edge condition is required to prevent fatigue cracking?

A: Sheared or slit edges contain micro-cracks and work-hardened burrs from the slitting process, which act as stress risers under dynamic bending. For applications undergoing high cyclic stress (such as recoil springs or valve shims), rounded edges (100% radius) or deburred edge profiles are necessary to remove micro-defects and extend fatigue life.

Q: What dimensional tolerances can be maintained across coil lengths?

A: Standard precision cold rolling achieves thickness tolerances of +/-0.008 mm on thin gauges (< 0.50 mm) and up to +/-0.025 mm on thicker strip up to 3.0 mm. Width slitting tolerance is held to +/-0.10 mm under standard setups, with special slitting tooling capable of holding +/-0.05 mm.

Hot Tags: spring steel strip, China spring steel strip manufacturers, suppliers, factory

Send Inquiry