316L Stainless Steel Sheet

Send Inquiry
316L Stainless Steel Sheet
Details
316L (UNS S31603 / EN 1.4404) is a low-carbon austenitic stainless steel alloyed with 2.0% to 3.0% molybdenum. The addition of molybdenum significantly improves resistance to chloride pitting and crevice corrosion compared to standard 304/304L alloys.
Category
Stainless & Alloy Steel
Share to
Description

316L (UNS S31603 / EN 1.4404) is a low-carbon austenitic stainless steel alloyed with 2.0% to 3.0% molybdenum. The addition of molybdenum significantly improves resistance to chloride pitting and crevice corrosion compared to standard 304/304L alloys.
With a low carbon content controlled to 0.030% maximum, 316L prevents harmful chromium carbide precipitation during welding. This allows the material to retain its intergranular corrosion resistance in the as-welded condition without requiring post-weld heat treatment.


Supplied in cold-rolled (thin gauge) and hot-rolled (heavy plate) conditions, 316L sheet is engineered for marine, chemical, pharmaceutical, and high-chloride industrial environments.

 

Key Product Characteristics

 

Pitting Corrosion Resistance: PREN (Pitting Resistance Equivalent Number) rating of 23 to 25 prevents localized attack in brackish water and high-chloride environments.


Intergranular Protection: Low carbon content eliminates chromium carbide depletion along grain boundaries during thermal welding cycles.


Cold Formability: Excellent deep-drawing and roll-forming capabilities without premature work hardening or micro-cracking.


Cryogenic Toughness: Retains high impact strength and ductile properties at sub-zero temperatures down to -196°C (-320°F).


Non-Magnetic Properties: Fully austenitic crystal structure ensures non-magnetic performance in the fully annealed state (permeability <= 1.02).

 

Technical Specifications

 

Chemical Composition (wt%, ASTM A240)

 

Element

Cr

Ni

Mo

C

Mn

Si

P

S

N

Fe

Min.

16.0

10.0

2.00

-

-

-

-

-

-

Balance

Max.

18.0

14.0

3.00

0.030

2.00

0.75

0.045

0.030

0.10

Balance

 

Mechanical Properties (Solution Annealed Condition)

 

Mechanical Property

Minimum Requirement

Typical Test Standard

Tensile Strength (Rm)

>= 485 MPa (70 ksi)

ASTM A370 / EN ISO 6892-1

Yield Strength (Rp0.2)

>= 170 MPa (25 ksi)

ASTM A370 / EN ISO 6892-1

Elongation (A5)

>= 40%

ASTM A370 / EN ISO 6892-1

Hardness (Max.)

95 HRB / 217 HBW

ASTM E18 / ASTM E10

 

Grades & Standards

American Standards

ASTM A240 / A240M, ASME SA240, ASTM A666

European Standards

EN 10088-2, EN 10028-7 (W.Nr. 1.4404 / X2CrNiMo17-12-2)

International Standards

ISO 15156-3 (NACE MR0175 for sour gas service), JIS G4304 / G4305

Dual certification to both 316 and 316L is available upon technical request.

 

Surface & Processing Options

 

Standard Mill & Surface Finishes

  • No. 1 (HRAP): Hot rolled, annealed, and descaled. Matte finish designed for structural tanks, pressure vessels, and industrial equipment.
  • 2B: Cold rolled, heat treated, pickled, and pinch-passed. Smooth, non-directional mill finish suitable for general fabrication.
  • BA (Bright Annealed): Cold rolled and heat treated in a controlled atmosphere furnace. Ultra-smooth, highly reflective finish for sterile and sanitary applications.
  • No. 4 (Satin / Polished): Unidirectional 150 to 240 mesh abrasive finish. Standard for food processing equipment and architectural fixtures.
  • HL (Hairline): Continuous fine longitudinal polishing lines for decorative panels, elevator interiors, and building cladding.


Value-Added Processing Services

  • Precision slitting and coil shearing (width tolerance +/- 0.2 mm)
  • Fiber laser cutting, high-definition plasma cutting, and waterjet processing
  • Protective PE / Laser film application (single or double-sided, 70 to 100 microns)

 

Applications

01/

Chemical & Petrochemical Processing: Reaction vessels, heat exchangers, acid piping manifolds, distillation columns.

02/

Pharmaceutical & Biotechnology: Process piping, cleanroom wall cladding, sterile fluid storage vessels (sanitary 2B/BA finishes).

03/

Marine & Offshore Engineering: Deck fittings, desalination plant piping, splash-zone hardware, pump components.

04/

Food & Beverage Manufacturing: Dairy holding tanks, commercial brewing vats, food contact processing machinery.

Quality Control & Inspection

 

Every production lot undergoes full verification. Mill Test Reports (MTR) fully compliant with EN 10204 3.1 or EN 10204 3.2 are included with all exports.
Standard Quality Assurance Protocols

  • Dimensional Verification: Laser gauge thickness checks per ASTM A480 / EN 10058.
  • Chemical Heat Analysis: Optical Emission Spectrometry (OES) testing.
  • Mechanical Testing: Tensile, yield, elongation, and Rockwell/Brinell hardness verification.
  • Corrosion Resistance: Intergranular corrosion testing performed per ASTM A262 Practice E (Strauss Test).
  • Non-Destructive Testing (NDT): Ultrasonic testing (UT) for heavy plates per ASTM A578 Level A/B available upon request.
  • Third-Party Inspection: Full support for SGS, TUV, BV, or Intertek pre-shipment inspections.
 

Request a Commercial Quote

 

To receive an accurate technical and commercial proposal within 24 hours, please submit the following specifications:

  • Grade & Specification: Grade (e.g., 316L or dual-certified 316/316L) and reference standard (e.g., ASTM A240 or EN 10088-2).
  • Dimensions: Thickness x Width x Length (in mm or inches).
  • Surface Finish: Finish type (No. 1, 2B, BA, No. 4, HL) and laser film protection needs.
  • Quantity: Total order volume by weight (metric tons) or sheet count.
  • Processing Requirements: Cutting, shearing, or custom edge conditions (mill edge vs. slit edge).
  • Testing & Inspection: Specific NDT, ASTM A262 corrosion testing, or EN 10204 3.1/3.2 MTR requirements.
  • Logistics & Terms: Target port of destination, delivery schedule, and preferred Incoterms (FOB, CIF, CFR, DDP).
 

Supply & Customization Options

 

Dimension Parameter

Range / Specifications

Thickness (Cold Rolled)

0.3 mm to 6.0 mm (0.012 in to 0.236 in)

Thickness (Hot Rolled)

3.0 mm to 100.0 mm (0.118 in to 3.937 in)

Standard Widths

1000 mm, 1219 mm (4 ft), 1500 mm, 2000 mm (Custom slitting available)

Standard Lengths

2000 mm, 2438 mm (8 ft), 3000 mm, 6000 mm (Cut-to-length available)

Export Packaging

Fumigated wooden crates/skids, interleave paper or protective film between sheets, edge protection, steel strapping, and VCI anti-rust moisture-barrier wrapping.

 

FAQ

 

Q: What is the primary operational difference between 316 and 316L stainless steel?

A: 316L contains a maximum carbon content of 0.030%, whereas standard 316 allows up to 0.080% carbon. The lower carbon level in 316L prevents chromium carbide precipitation during welding, maintaining full corrosion resistance in welded zones without requiring post-weld solution annealing.

Q: Is 316L stainless steel suitable for marine splash zones and seawater?

A: Yes. The 2.0% to 3.0% molybdenum content in 316L offers good resistance to chloride pitting and crevice corrosion in marine atmospheric environments and splash zones. For continuous immersion in warm or highly concentrated seawater, high-alloy super-austenitic grades (such as 254 SMO) or duplex steels are recommended for long-term reliability.

Q: What is the maximum continuous service temperature for 316L sheet?

A: In dry continuous air service, 316L exhibits oxidation resistance up to 870°C (1600°F). When wet aqueous corrosion resistance is required following high-temperature exposure, 316L can operate safely between 425°C and 860°C due to its resistance to carbide precipitation.

Hot Tags: 316l stainless steel sheet, China 316l stainless steel sheet manufacturers, suppliers, factory

Send Inquiry